Product Style: AEM Cold Air Intake System
Replacement Filter: 21-2109DK
CARB Exempt: Yes
TUV Approved (Europe): No
Weight: 8.6 lb (3.9 kg)
Product Box Length: 20.25 in (514 mm)
Product Box Width: 12.25 in (311 mm)
Product Box Height: 12.25 in (311 mm)
AEM pioneered the Cold Air induction system for sport compact cars in 1994.
A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.
Our Cold Air systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. Most merchandise usually ships out from our facility or directly from our vendors in 2-3 business days.
Please allow another 5-7 business days (est.)for products to be delivered after its shipped. For all special orders or made to order items, shipping time are not guaranteed. Please call us for an estimated delivery time.
We ship with Fedex, UPS or USPS for all products with smaller dimension such as headlights, tail lights, headers, exhausts, etc. . All oversized item will be handled by LTL carrier such as bumpers, carbon fiber hoods, fiberglass hoods, large trunks. Etc.
Shipping insurance: All shipping and handling included delivery or signature confirmation and additional insurance to protect your items in case of damage during shipping.
Shipping to all Po box, US military addresses at overseas locations (APO/FPO): VIA USPS Only (No Over-Size Items). Innovation has always been AEM’s core competency. As J.C. would say “if you can’t make something better, why make it all?” This “make it better” drive combined with our commitment to the sport compact market continues to distinguish AEM from the many company’s offering “Me Too” copycat products. Our innovations are inspired by a passion for engineering excellence, being there and getting our hands dirty, the only way to really understand technology enough to make it better.
- AEM was one of the first companies to engineer and design performance aftermarket induction systems with specific tube lengths and diameters to take advantage of pressure waves in the inlet tract. The tuning of the inlet tract dimension creates more control over the RPM range being affected.
- AEM began to explore the advantages of cooler air on combustion efficiency way back in the mid nineties and coined the phrase Cold Air Intake.
- AEM worked with K&N in 1999 to design conical air filters with built in air horns at the filter base to greatly enhance air flow into the inlet duct.
- AEM developed the first dual chamber intake kits designed to generate more power over a broad RPM range.
- AEM designed a unique air bypass valve in order to avoid hydro-lock situations for systems where the filter is low enough to encounter water at certain times.
- AEM created one of the first hybrid induction systems for cars with engine swaps.
- AEM has developed an electronic solution to MAF sensor scaling problems when using non stock inlet system dimensions for additional power.
The company continues to lead the way with innovative products that push the envelope of what is possible.
Our products are consistently put to the test by the industry’s leading automotive publications and websites, including Motor Trend, Car & Driver, Road & Track, Turbo, Sport Compact Car, Super Street, Modified, 5.0 Mustang & Super Fords, Race Pages, Muscle Mustangs & Fast Fords, Truckin’, Off Road, Sport Truck, 4Wheel Drive & Sport Utility, 4Wheel & Off Road, Temple of VTEC (www.vtec.net), EvolutionM.net, FreshAlloy.com, Nissanperformancemag.com, k20a.org, turbomustangs.com, tenmagazines.com, off-road.com and more. The reports of these independent tests consistently prove that AEM and BRUTE FORCE performance products are industry leaders, and that is why you will find them under the hoods of many of the best racing teams and industry experts nationwide. At IloveBodykits.com we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the automotive industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.
Return Policy
If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:
- Products must be in original packaging and in a new and resalable condition.
- Any product that was used or fully/partially installed is non-returnable.
- All returned products have a flat Restocking Fee of 30%.
- Shipping Fees are non-refundable.
- Original shipping cost will be deducted (For all shipping cost included deals).
- All returns must be made via our Return Procedure with a valid RMA form.
- There are few non-returnable products & services that are listed in section below.
- Order cancellations can only be requested prior to shipment or in some cases, prior to the start of the manufacturing or painting process.
Please note: If the return of an item was caused by an error on our or a manufacturer's part, restocking and shipping fees do not apply
Return Procedure
To return a product you must first request a Return Merchandise Authorization (RMA). The RMA form will include an exact return address and detailed instructions on how to return a product. You may request an RMA using the following methods:
Please let us know which particular item(s) you would like to return and the reason. If you believe you have received the wrong /defective products, please take detail image shots of the product and email to us. Please allow 24 to 72 hours for processing since in many instances, we have to wait for a manufacturer's response.
Exchange Procedure
There are 2 ways you can go about exchanging a product:
Option 1 (Slower) – Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is difference in price, you will be either refunded or charged the difference. Restocking will applied.
Option 2 (Faster) – Order the new part online or over the phone so it can be shipped to you right away. Then request an RMA using a standard Return Procedure for the part you would like to return. Upon return of the part a refund will be issued promptly.
Defective, Damaged, or Incorrect Products
If your product(s) arrive defective, damaged, or simply incorrect, please contact our customer service depart as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier. Customer is responsible to notify us with the issue within 48 hours after delivery by sending an email to RMA@ilovebodykits.com with the images of the actual product received in the attachment. If a product is shipped via truck freight, its buyer's responsibility to fully inspect the product before you accept the package. If any damage occurs, you must notify the the driver and noted on the shipping receipt or the claim will be denied.
When a replacement part is requested to be shipped prior to the return of original merchandise, we must temporarily authorize your credit card until the original merchandise is returned
Non Returnable Products & Services:
The following products cannot be returned/exchanged due to manufacturer's policies or their made-to-order custom features:
- Any item marked or classified as non returnable.
- Electronics related parts.
- Any custom orders or parts
- Any products made by Wingswest, Rksports, Sarona Design, Bomex.
- Any products shipped via truck freights. (except the products are specially noted)
Refunds & Credits
After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order (Credit Card, Paypal, or Check). The refund amount will be composed of the original purchase price minus shipping charges and applicable restocking fees. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.
IloveBodykits.com will not refund any labor charges or installation fees under any conditions. IloveBodykits.com will also not offer reimbursement for any damage acquired during installation or any other use of a product. |
Copyright 2008 Ilovebodykits.com - Body kits & more, All Rights Reserved