>> >> >> >> >> >> >>CXR-TRB-KIT-S13-SR20-GT35-R+IC-Kit
89-99 Turbo Kit 240SX S13 S14 SR20DET GT35 Ball Bearing
(1 Reviews)
Availability: In Stock
Product Usually Ships Out Within 1-3 Business Days

You Are Buying One Brand New

CXRACING Top Mount GT35 Ball Bearing Turbo Kit + FM Intercooler kit for

89-99 Nissan 240SX S13 S14 Chassis with S13 SR20DET Engine Swap

(Manifold and Turbo Fit S13 and S14 SR20DET motor, Intercooler only Fits S13 SR20DET,  Due to Throttle Body is different between S13 and S14 SR Engines. We do Offer S14 SR20DET FMIC kit too, check our other product Listings)

This is one of CXRACING's Newest Turbo Kits. Bolt on the fitment with Stainless Steel Manifold and Downpipe.

It supports 250 to 400 HP, Depends on Fuel System and Tuning

This kit was Developed from Scratch in US and Fully Tested. See below Project Car. It is very easy to install, have big HP.

Many Other SR20DET kits have fitment issues and not clear Mater Break Lines. This kit totally overcomes these issue and fits perfectly. Manifold also Supports T4 Turbo Flange, upgradable to bigger turbo (we have lowered the Manifold and spared room for T4 turbo)

This Kit fits both S13 and S14 Chassis with S13 SR20DET engine.

PRODUCT ID# 163489

$ 2072.76
List Price: $2694.59
You save: $621.83 (23.08%)

100% money back on anything
that goes on back order

Completely Redesigned Manifold, has lots of clearance for Mater Break Line. 

Turbo sits lower, forwarded, and Angled, Much better placement with all other parts.

304 Stainless Steel Manifold, Equal Length Runner,  High Flow Exhaust Design

3" Downpipe (2 pcs), Connects  3" Catback System.

GT35 Ball Bearing Turbo, Fast Spool, big Power.

External 38mm Wategate, with 8PSI default. Can be upgraded to Higher Boost Wastegate

Big FM Intercooler kit. Cools Air Efficiently.

Fitment is Fully Tested, Fitment very Well, not hitting other Parts.

> GT35 Ball Bearing Turbo: Air Inlet 4"

Compressed Air Outlet 2.5"

Bearing Ball Bearing Compressor / Journal Bearing Turbine

Turbine Housing Flange Standard T3

Exhaust Outlet 4-bolt, 3" OD

HP 250~400 WHP

Cooling Oil and Water Cooled

Working Pressure 6-25 PSI

Compressor .70  A/R

Turbine .63 A/R

Compressor Wheel Turbine Wheel 62 /67.8 mm

FM Intercooler kit:

Overall Size 29x11x3

Inlet & Outlet 2.75"

Aluminum Piping 2.5" Cold side, 2.75" hot side

Item(s) Included in this product:

GT35  Ball Bearing Turbo, 4" Air Inlet

Stainless Steel manifold

3" Downpipe, 2 pcs, V-Band

38mm 8 PSI Wastegate, with Dump tube

Oil Feeding line kit, Turbo Water pipes (Need Connecting hoses to block, not included, but can be purchased at any auto part store, very cheap, a few Dallors)

FMIC Intercooler + Piping kit, with Silicon hoses and clamps

Free Boost Gauge

Downloadable Installation Guide (only to Customers)

We also Offer other Different Versions of the Turbo kit and other Performance Products for 1G, Check our Store or  other Listings:

Same Kit with GT35 Turbo (Less Cost)

S13 3" Catback System (S13 only)

Aluminum Racing Radiator, Fan Shroud and Fans

Notes :

For the GT35 Turbo kit, make sure Engine is Built to handle big Power. Upgraded Clutch is highly Recommended too.

Recommended Injector, 400 to 550CC.

This turbo kit can be easily tuned with many other popular tuning kit/ECU for 240SX. 

Off Road Use ONLY

  Seth W.  -   Intercooler Piping Kit + BOV SR20DET 89-94 240SX S13   (Dallas, PA)
Easy to install. Highly recommended
(626)737-8628 sales@ilovebodykits.com Business Hour: Mon - Fri 9AM - 5PM Sat,Sun Closed
Common FAQ Term And Conditions Shipping Instruction International Order Wholesale Discount Easy Return
Auto Parts Make/Model RMA
Contact US About US Shipping Info Articles