Important things to know prior purchasing body kit products
1) All fiberglass body kits will require prep work prior painting.
5) The factory reinforcement bar may be required to remove prior installation.
You Are Buying One Brand New
CXRACING Top Mount T04E Turbo Kit + FM Intercooler kit for
89-99 Nissan 240SX S13 S14 Chassis with S13 SR20DET Engine Swap
(Manifold and Turbo Fit S13 and S14 SR20DET motor, Intercooler only Fits S13 SR20DET, Due to Throttle Body is different between S13 and S14 SR Engines. We do Offer S14 SR20DET FMIC kit too, check our other product Listings)
This is one of CXRACING's Newest Turbo Kits. Bolt on the fitment with Stainless Steel Manifold and Downpipe.
It supports 250 to 400 HP, Depends on Fuel System and Tuning
This kit was Developed from Scratch in US and Fully Tested. See below Project Car. It is very easy to install, have big HP.
Many Other SR20DET kits have fitment issues and not clear Mater Break Lines. This kit totally overcomes these issue and fits perfectly. Manifold also Supports T4 Turbo Flange, upgradable to bigger turbo (we have lowered the Manifold and spared room for T4 turbo)
This Kit fits both S13 and S14 Chassis with S13 SR20DET engine.
Completely Redesigned Manifold, has lots of clearance for Mater Break Line.
Turbo sits lower, forwarded, and Angled, Much better placement with all other parts.
304 Stainless Steel Manifold, Equal Length Runner, High Flow Exhaust Design
3" Downpipe (2 pcs), Connects 3" Catback System.
T04E Turbo, Fast Spool, big Power.
External 38mm Wategate, with 8PSI default. Can be upgraded to Higher Boost Wastegate
Big FM Intercooler kit. Cools Air Efficiently.
Fitment is Fully Tested, Fitment very Well, not hitting other Parts.
T 04E Turbo:
Bearing Wet Floating Bearings
Oil Inlet 1/8 NPT Oil Inlet
Flange Standard T3/T4 Flange,
HP 200-300 WHP
Working Pressure: 5~20 PSI
Compressor .50 A/R Compressor
Turbine .63 A/R Turbine
Compressor Wheel Exducer: 3"
Turbine Wheel Exducer: 2.2"
Hot Side 5 Bolt Standard Hot Side
| FM Intercooler kit:|
Overall Size 29x11x3
Inlet & Outlet 2.75"
Aluminum Piping 2.5" Cold side, 2.75" hot side
Item(s) Included in this product:
Stainless Steel manifold
3" Downpipe, 2 pcs
38mm 8 PSI Wastegate, with Dump tube
Oil Feeding line kit, Turbo Water pipes (Need Connecting hoses to block, not included, but can be purchased at any auto part store, very cheap, a few Dallors)
FMIC Intercooler + Piping kit, with Silicon hoses and clamps
Free Boost Gauge
Downloadable Installation Guide (only to Customers)
We also Offer other Different Versions of the Turbo kit and other Performance Products for 1G, Check our Store or other Listings:
Same Kit with GT35 or GT35 Ball Bearing Turbo Upgrade
S13 3" Catback System (S13 only)
Aluminum Racing Radiator, Fan Shroud and Fans
For the T04E Turbo kit, make sure Engine is Built to handle big Power. Upgraded Clutch is highly Recommended too.
Recommended Injector, 400 to 550CC.
This turbo kit can be easily tuned with many other popular tuning kit/ECU for 240SX.
Off Road Use ONLY