>> >> >> >> >> >> >>CXR-TRB-KIT-KA24DE-T04E
1991-1999 240SX S13 S14 Ka24DE T04E Top Mount Turbo Kit
(1 Reviews)
Availability: In Stock
Product Usually Ships Out Within 1-3 Business Days

You Are Buying One Brand New

CXRACING Top Mount T04E Turbo Kit for

91-99 Nissan 240SX S13 S14 with KA24DE (DOHC) Engine

This is one of CXRACING's Newest Turbo Kits. Bolt on the fitment with Stainless Steel Manifold and Downpipe.

It supports 200 to 300 HP, Depends on Fuel System and Tuning

This kit was Developed from Scratch in US and Fully Tested. See below Project Car. It is very easy to install, have big HP gain. FMIC is NOT Included in This Product, but we do offer a bolt on FMIC kit too, check out other product listings.

Many Other KA24DE kits have fitment issues and not clear Master Break Lines. This kit totally overcomes these issue and fits perfectly . This Kit fits both S13 and S14 Chassis with KA24DE engine.

We also considered other samll things, such as ERG cap, Heat Shield, Wategate Dump Tube, and MAP Sensor flange Adapter. All Included, make it a lot more easy to install and save costs.

PRODUCT ID# 163463

$ 1240.62
List Price: $1612.81
You save: $372.19 (23.08%)

100% money back on anything
that goes on back order

Completely Redesigned Manifold, has lots of clearance for Master Break Line. 

Turbo sits lower, forwarded, and Angled, Much better placement with all other parts.

Comes with Aluminum heat Shield between turbo exhaust housing/downppipe and  Master Break line.

304 Stainless Steel Manifold, Equal Length Runner,  High Flow Exhaust Design

3" Downpipe (2 pcs), Connects  3" Catback System (Catback not included).

T04E Turbo, Fast Spool, big Power.

Bolt on Adapter to Stock MAF.

External 38mm Wategate, with 8PSI default. Can be upgraded to Higher Boost Wastegate

Includes a ERG cap to seal ERG Tube.

Fitment is Fully Tested, Fitment very Well, not hitting other Parts.

T04E Turbo:

Bearing Wet Floating Bearings

Oil Inlet 1/8 NPT Oil Inlet

Flange Standard T3/T4 Flange,

HP 200-300 WHP

Working Pressure: 5~20 PSI

Compressor .50  A/R Compressor

Turbine .63 A/R Turbine

Compressor Wheel Exducer: 3"

Turbine Wheel Exducer: 2.2"

Hot Side 5 Bolt Standard Hot Side

Item(s) Included in this product:

T04E Turbo, 3" Air Inlet

Stainless Steel manifold

3" Downpipe, 2 pcs

38mm 8 PSI Wastegate, with Dump tube

Oil Feeding line kit, Turbo Water pipes (Need Connecting hoses to block, not included, but can be purchased at any auto part store, very cheap, a few Dallors)

Aluminum Heat Shield

ERG cap

MAF Flange to bolt to Stock or N62 MAP Sensor.

Downloadable Installation Guide (only to Customers)

We also Offer other Different Versions of the Turbo kit and other Performance Products for 1G, Check our Store or  other Listings:

Same Kit with GT35 or GT35 Ball Bearing Turbo Upgrade

Big FMIC kit

S13 3" Catback System (S13 only)

Aluminum Racing Radiator, Fan Shroud and Fans

Notes :

FMIC is Highly Recommended.

For the T04E Turbo kit, if you plane to tune it over 250 HP, make sure Engine is Built to handle big Power. Upgraded Clutch is highly Recommended too.

Recommended Injectors, 400 to 550cc

This turbo kit can be easily tuned with many other popular tuning kit/ECU for 240SX. 

Off Road Use ONLY

  Seth W.  -   Intercooler Piping Kit + BOV SR20DET 89-94 240SX S13   (Dallas, PA)
Easy to install. Highly recommended
jon@ilovebodykits.com sales@ilovebodykits.com Business Hour: Mon - Fri 9AM - 5PM Sat,Sun Closed
Common FAQ Term And Conditions Shipping Instruction International Order Wholesale Discount Easy Return
Auto Parts Make/Model RMA
Contact US About US Shipping Info Articles